Panasonic NV-HS1000, Руководство по обслуживанию

Страница: 48 / 138

....
I t
Editing when not Using an Edit Cable
To connect a VTR or Movie Camera
without an Edit Socket and use This VTR
as the Recording VTR
•Connect the AV1 socket on this VTR to the TV.
•Connect the AV2 socket or the AUDIONIDEO/S-VIDEO
IN (AV3) sockets on this VTR to the playback unit.
•Select A2 or A3 by pressing AV on this VTR.
A2: Through the AV2 socket
A3: Through the AV3 sockets on front panel
Set INPUT SELECT on this VTR.
S-VIDEO: Through the S-VIDEO IN and AUDIO IN
sockets
LINE:
Through the VIDEO IN and AUDIO IN
sockets
•Set EDIT MODE on this VTR to RECORDER.
•Control is performed by the respective units.
Preparation
•Make the necessary connections.
• Insert a recorded cassette Into the playback unit, and a
cassette with an intact erasure prevention tab Into the
recording VTR.
•Confirm that the TV Is on.
Recording VTR
CJ
SYNC. EDIT
50
Assembly Editing
Operations
1
Press
PAUSE/STILL
on the recording
VTR.
2
Search for the end of the previous
recording.
-✓
�
•-·
:=
0 �
- -
-
-
,.,. '
3
Press REC to set for the new recording.
Q
4
Start playback on the playback unit.
5
Press PAUSE/STILL again to start the
new recording.
6
Press
STOP
to stop recording.
<v
Synchronized Editing
By connecting a VTR or movie camera with synchronized
editing capability to this VTR' using a synchro connection
cord (optional), It Is possible to synchronize the playback
start and stop of the playback unit with the recording start
and stop of this VTR.
1 Put the recording VTR Into the recording pause mode by
pressing REC and PAUSE/STILL.
2 Put the playback unit Into the still playback mode at the
point where editing Is to begin.
3 Press PAUSE/STILL on the recording VTR.
•The playback unit switches over to the playback mode,
and copying begins automatically.
Editing when not Using an Edit Cable
Insert Editing, AV Insert Editing and Audio Dubbing
Operations
1 D
2
0 """"
.. CJ
3
✓
��o
� 0 :::.
- -
� � 0
II
P.Ws.t:IST-.L
4
✓
�-
� 0 :::.
- -
- -
-
-
,.,. '
5
0 -
➔
C]
6
7
0
•1.ust·Sloe.t
•
On Screen Display
OSD MENU
=
CONTROt.CA!llEISNOT
cormEcTED
EDITING
-
AUOIOOUO
EDlflN-G
-
AUDIO DUD
EDfT,t,/G
mi'JI
AUOIO 01/fl
EOITING
lll!,'!lllJ
Auum ouo
51
•
Press EDIT MENU.
Select
EDITING.
Press PAUSE/STILL and search for the edit
end point, and press
RESET.
•It Is not required for audio dubbing to search for.the edit
end point and reset.
Search for the edit start point.
Select
INSERT
or
AUDIO DUB.
•AV Insert editing Is selected If both AUDIO DUB and
INSERT are selected.
•II once selected, Insert or Audio Dubbing mode Is still
active even If tho On Screen Display disappears by
pressing EDIT MENU.
Start playback on the playback unit.
Press PAUSE/STILL.
•Editing begins.
•Insert and AV Insert editing will linish when the counter
reaches 0:00.00,
•Press STOP to stop audio dubbing.
•