Panasonic NV-HS1000, Руководство по обслуживанию

Страница: 46 / 138

....
I t
Operations
12
0
13
lll!Illl
D
Notes for Programme Editing:
On Screen Display
►!'LAVEil n[CORDEn •
CDITING rn PROGRESS
•For the edit start point, use a location which is al least
10 seconds from the beginning of the tape. Otherwise, the
programme will not be executed.
•Programme editing can be suspended in mid-execution by
pressing ESC. As a result, however, the picture
immediately after suspending may disappear.
•Programmes are stored even after editing is completed.
Unless they are cancelled, programmes are stored even
after the power has been turned olf.
•Programme editing can not be performed with a movie
camera that has a 4-digil counter.
The following movie cameras will not work in the
programme editing mode with this VTR.
VHS full movies: NV-M10E, NV-M25E, NV-M40E,
NV-MS4E
VHS-C movies: NV-MS90E
(As of April 1994)
46
Select PERFORM EDITING.
•If a programme Is not correct, It will appear on the screen.
Set the edit start and end points correctly.
•To see a preview before performing editing, select
PREVIEW. See page 48.
Press ENTER.
•Editing begins.
•After editing of all programmes is completed, the both
VTRs stop In still playback mode.
When the VITC function Is on:
•If the programme on the normal counter has been stored,
the On Screen Display shown below may appear after
step 3.
If editing Is to be performed using the VITC function,
select YES lo cancel all the editing programmes.
(When the VITC function Is off, the On Screen Display
shown below will appear if the programme with the lime
code has been stored.)
ALLCLEAR
YES G!i1
EDITING WITH VITC?
•When MARK IN or MARK OUT Is pressed, the lime code
Is displayed on the screen In Increments of hours,
minutes, seconds and frames (25 frames per second).
INSERT
rn
lll'L.AVER
IN: 0h00m20s101
OUT: OIIOOmJOS20f
• •
Programme Editing
a In
o
�u _______
----2!_[!__��====:=!.i
��
•o•:". I
'o"a"'o .. ·- ---
------
Cl) Cl) Cl) Cl) Cl) Cl) Cl) Cl) Cl) Cl)
..
.... --:;--
·-
......
-
··,·•
... ...... ___
... .
--
..
Other Editing Functions
To confirm and Change Editing
Programmes
1 Select CONFIRM after selling the edit start and end
points.
0
2 Press ENTER.
•The programme list for the playback VTR Is displayed.
CJ
l't.AVl:11
�
OUT Ohlllml&
!jlN INJ2M211
our � m ,
0
zi,
=�:
�twcts
PAGE
ir
3 Press RECORDER to confirm the programmes on the
recording VTR.
• Press PLAYER to return to the programme list on the
playback VTR.
•
47
4 Select the programme to be changed.
F't.AVEII
{i!IN . 0h02m�51
Ol.11· llhOlr.111:i,
OUT II m 1
ffltN II m I
OIJI
II m 1
��:�,i�s
P/\GE �
5 Search for the start or end point to be changed and press
MARK IN or MARK OUT.
6 Press ENTER.
IIPL.AYEn
INSERT
�
IN. OhOSn11�
OUT: llh0Sm2h
To cancel an Editing Programme
In step 4 above, select the programme to be canceled and
press PROG. CLEAR.
PL,.vt:n
m111 l),Q:2m55s
W•iih
M1 h m I
001 h III I
(111N
• m I
OUI h m I
CHANGE ·Del
PllEVIOOS PAGE llil
•