Before using
17
LSQT1290
Adjusting LCD monitor/viewfinder
ª
Adjusting the brightness and colour
level
1
Set [SETUP] >> [LCD SET] or [EVF SET] >>
[YES].
2
Move the joystick up or down in order to
select the item to be adjusted.
[LCD SET]
:
Brightness of the LCD monitor
:
Colour level of the LCD monitor
[EVF SET]
:
Brightness of the viewfinder
3
Move the joystick left or right to move the
bar indication representing the brightness.
4
Press the [MENU] button or the joystick to
complete the settings.
≥
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
≥
To adjust the brightness of the viewfinder, close
the LCD monitor and extend the viewfinder to
activate it.
≥
These settings will not affect the images actually
recorded.
Recording with the built-in LED
video light
1
Press the [LIGHT] button.
≥
The [
] indication appears on the LCD
monitor.
ª
To cancel the built-in LED video light
Press the [LIGHT] button again.
≥
The subject should be within 1.5 metres of the
movie camera.
≥
Using the LED video light reduces battery time.
≥
Set the LED video light to off when not in use.
≥
Do not look directly into the light.
≥
Using the colour night view function at the same
time will make conditions even brighter.
≥
The LED video light enables simply lightening
the images taken in a dimly-lit place. We also
recommend using it in a bright place to obtain
high quality images.
LIGHT
LSQT1290_ENG.book 17 ページ ２００８年３月４日 火曜日 午後２時２０分
