Before using
10
LSQT1290
ª
How to turn off the power
1
Set the mode dial to OFF.
≥
The status indicator goes off when the power
turns off.
ª
How to turn the power on and off with
the LCD monitor/viewfinder
When the mode dial is set to Tape Recording
Mode, the power can be turned on and off with
the LCD monitor and the viewfinder.
1
Open the LCD monitor out or extend the
viewfinder to turn on the power.
(
-11-
,
-12-
)
≥
The LCD monitor or the viewfinder will be
activated.
2
Close the LCD monitor and retract the
viewfinder to turn off the power.
≥
The power will not turn off unless the LCD
monitor is closed and the viewfinder is
retracted.
≥
The status indicator automatically goes off
and the power turns off. (If quick start is set to
[ON] (
-12-
), the unit goes into quick start
standby mode and the status indicator lights
green.)
≥
The power does not turn off even if the
LCD monitor is closed and the viewfinder
is retracted while recording on a tape.
3
Open the LCD monitor or extend the
viewfinder to turn the power on and use the
movie camera again.
≥
The status indicator lights red and the power
turns on.
TAPE RECORDING MODE
Use this when you record the
image on a tape.
TAPE PLAYBACK MODE
Use this to play back a tape.
OFF
The power turns off.
Set the mode dial to OFF when this unit is not
being used.
LSQT1290_ENG.book 10 ページ 2008年3月4日 火曜日 午後2時20分