Panasonic NV-GS250EB, Руководство по эксплуатации

Страница: 22 / 64

Record mode
22
VQT0N69
Check the recording
The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set
to a recording pause.
≥
Set to Tape Recording Mode.
1
Press the joystick during the recording
pause until the
icon 1 appears .
2
Move the joystick down to select the
recording check icon [
].
Blank search function
Searches for the last part of the image recorded
(unused part of the tape).
≥
Set to Tape Recording/Playback Mode.
1
Set [BASIC] or [ADVANCE] >>
[BLANK SEARCH] >> [YES].
ª Stopping blank search midway
through
Move the joystick down.
≥
If the cassette tape has no blank part, then the
camera will stop at the end of the tape.
≥
The camera stops at a point approx. 1 second
before the end of the last image recorded.
When you start recording at that point, the
image can be recorded seamlessly from the last
image.
Recording still pictures onto a card
(Photoshot)
≥
Set to Card Recording Mode.
1
Press the [PHOTO SHOT] button halfway in
order to adjust focusing. (For auto focusing
only)
≥
If you set [OIS] to [ON], then the image
stabilizer function will be more effective.
(MEGA OIS will be indicated.)
≥
The iris/gain value is fixed and this camera
focuses on the subject automatically.
1 Shutter chance mark
±
(The white lamp flashes.):
Focusing
¥
(The green lamp lights up.):
When in focus
No mark: When focusing is unsuccessful
≥
The shutter chance mark is indicated as follows
when the [PHOTO SHOT] button is not pressed
halfway. Please use it as a guide for recording.
¥
(The green lamp lights up.):
When in focus and a good picture
can be recorded
±
(White lamp lights up.):
Almost in focus
2
Focus area
2
Press the [PHOTO SHOT] button fully.
ª
To record still pictures clearly
≥
When zooming in on the subject with a
magnification of
4
k
to 10
k
or higher, it is
difficult to reduce the slight shaking from holding
the movie camera by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
≥
When recording still pictures, hold the movie
camera firmly with your hands and keep your
arms stationary at your side so as not to shake
the movie camera.
≥
You can record stable pictures without shaking
by using a tripod and the remote control.
1
PC
PHOTO
SHOT
1
2
GS250EB.book 22 ページ ２００４年１２月１８日 土曜日 午後１２時２１分