Before using
8
VQT0N50
ª
To use as a grip belt
Adjust the belt length so it fits your hand.
1
Adjust the belt length and the pad position.
1
Flip the belt.
2
Adjust the length.
3
Fix the belt.
Using the LCD monitor
You can record the image while viewing it on the
LCD monitor opened.
1
Put a finger on the LCD monitor open part
and pull the LCD monitor out in the
direction of the arrow.
≥
The viewfinder will go off.
≥
It can open up to 90
o
.
2
Adjust the angle of the LCD monitor as you
prefer.
≥
It can rotate up to 180
o
1
towards the lens or
90
o
2
towards the viewfinder.
≥
The brightness and colour level of the LCD
monitor can be adjusted from the menu.
≥
If it is forcibly opened or rotated, the camera
may be damaged or fail.
≥
Check that the card slot cover is closed.
≥
When the LCD monitor is rotated by 180
o
towards the lens (when recording yourself), the
LCD monitor and the viewfinder will be
simultaneously activated.
Using the viewfinder
ª
Extending the viewfinder
1
Pull out the viewfinder and extend it by
pinching the extension knob.
ª
Adjusting the field of view
1
Adjust the focus by sliding the eyepiece
corrector knob.
≥
You can adjust the brightness of the viewfinder
from the menu.
Power supply
ª
Charging the battery
When this product is purchased, the battery is not
charged. Charge the battery before using this
product.
≥
Battery charging time (
-9-
)
≥
We recommend using Panasonic batteries.
≥
If you use other batteries, we cannot guarantee
the quality of this product.
≥
If the DC input lead is connected to the AC
adaptor, then the battery will not get charged.
Remove the DC input lead from the AC adaptor.
1
Connect the AC mains lead to the AC
adaptor and the AC mains socket.
2
Put the battery on the battery mount by
aligning the mark, and then securely plug it
in.
1 3
2
OPEN
2
90
o
1
180
o
12:30:45
12:30:45
12:30:45
1.4. 2005
1.4. 2005
1.4. 2005
12:30:45
1.4. 2005
GS150_GN.book 8 ページ ２００５年１月６日 木曜日 午後４時５０分
