Record mode
24
VQT0N50
Quick start
This camera will be put into standby in approx.
1.7 seconds after the power is turned on.
≥
This is only activated in the following cases.
≥
A tape or a card is inserted, while the Tape
Recording Mode is set.
≥
A card is inserted, while the Card Recording
Mode is set.
1
Press the [QUICK START] button.
≥
The quick start recording lamp lights up.
(Press the button again to cancel it.)
2
Set the [OFF/ON] switch to [OFF].
≥
The quick start is now ready.
3
Set the [OFF/ON] switch to [ON].
≥
This camera will be put into a recording
pause in approx. 1.7 seconds after it is turned
on.
ª
To cancel the quick start when the
power is [OFF]
Press and hold the [QUICK START] button for
approx. 2 seconds. The lamp will go off and the
camera will be completely turned off.
≥
If the standby continues for approx. 30 minutes,
then the lamp will go off and the camera will be
completely turned off.
≥
When you rotate the mode dial or remove the
battery, the quick start recording lamp is turned
off and the quick start mode is cancelled. If the
movie camera is turned on and the Tape/Card
Recording Mode is set though, the lamp turns
on and the quick start mode is restored.
≥
When the camera is quick-started with the white
balance on automatic, it may take some time
until the white balance is adjusted if the scene
being recorded has a light source different from
the scene last recorded. (When the colour night
view function is used, however, the white
balance of the scene last recorded is retained.)
≥
The zoom magnification may differ from when it
is in the quick start standby mode and when the
recording starts.
≥
Since about half the power of normal recording
is used in quick start standby, using quick start
reduces the recordable time.
Backlight compensation function
This protects a backlit subject from being
darkened.
≥
Set to Tape/Card Recording Mode.
1
Press the joystick until the icon
1
appears.
2
Move the joystick right to select the
backlight compensation icon [
].
≥
The image on the screen will become
brighter.
ª
To return to normal recording
Select the [
] icon again.
≥
If you operate the [OFF/ON] switch or the mode
dial, the backlight compensation is cancelled.
Night view functions
This function allows you to record colour subjects
in dark locations to stand out against the
background.
Attach the camera to a tripod, and you can record
images free from vibration.
≥
Only manual focusing can be used.
≥
Recorded scene is seen as if frames were
missed.
Colour night view function
You can record dark locations brightly in colour.
0 Lux night view function
You can record completely dark locations with the
light of the LCD monitor.
≥
Set to Tape Recording Mode.
1
Press the joystick until the icon
1
appears.
2
Move the joystick up to select the night
view icon [
].
≥
Each upward press switches the modes.
OFF
#
Colour night view function
#
0 Lux
night view function
#
OFF
START
QUICK
OFF
ON
POWER
ª
1
1
GS150_GN.book 24 ページ ２００５年１月６日 木曜日 午後４時５０分
