34
Using a Card
A Card can be used to record files or play
back
files.
≥
Use genuine card only.
ª
Inserting a Card
Before inserting a Card, be sure to turn off the Movie Camera.
1
While holding the Memory Card with its cut off corner
A
facing right
1
, insert it into the Card Slot
2
.
≥
The display of the Card Slot changes from
3
to
4
.
Ejecting a Card
After turinig the Movie Camera off, slide the [CARD EJECT] Lever
5
to the
left.
ª
[ACCESS] Lamp
6
While the Movie Camera is making an access to the Card (reading,
recording, playback, erasing or moving of images), the [ACCESS] Lamp
lights up.
≥
While the [ACCESS] Lamp is on, never attempt to open the Card
Compartment, to pull out the Card, to turn off the Movie Camera, or to
switch the [TAPE/CARD] Selector. Such actions will damage the Card,
cause loss of recorded data and cause the Movie Camera to malfunction.
~~~~~~~~~~~~~~~~~~~~~~~~
Recording on a Card
Three kinds of data can be recorded by selecting with the [PICTURE/
MPEG4/VOICE] Selector Switch. When recording picture, select [PICTURE]
(Card PhotoShot), when recording moving picture, select [MPEG4] (MPEG4
Recording), when recording voice, select [VOICE]
(Voice Recording)
.
≥
If the [TAPE/CARD] Selector is set to [CARD], the Movie Camera is
automatically turned off when you leave it for about
6
minutes without
performing any photshot recording.
≥
When the [TAPE/CARD] Selector is set to [CARD], you cannot record to the
Tape.
ª
Card Photoshot
Still pictures can be recorded on the Memory Card from the Movie Camera
lens as well as from scenes that have already been recorded on a cassette.
The size of images that are recorded using this Movie Camera is
approximately 1,080,000 pixels, and recording of images with a size that is
larger than a million pixels is called mega-pixel still-picture recording.
Compared to images of normal recording, images that are created by mega-
pixel still-picture recording can be printed out clearer.
Recording from the Movie Camera Lens
(CAMERA Mode)
1
Slide the [TAPE/CARD] Selector towards [CARD].
2
Slide the [PICTURE/MPEG4/VOICE] Selector Switch to
[PICTURE].
3
Set [PICTURE SIZE] in [CARD SETUP] Sub-Menu to
[1200
t
900] or [640
t
480].
≥
If you select [1200
t
900], you can take pictures with higher resolution.
(Mega-Pixel Recording)
4
Press the [PHOTO SHOT] Button.
≥
The [
] Indication light in red.
1
Recording is not possible while the Indication is lit in green.
≥
Please use the supplied Lens Hood for MEGA Still Picture Recording in
Mega-Pixel Recording. You can get better image.
Recording from a Cassette (VCR Mode)
1
1
1
1
Slide the [TAPE/CARD] Selector towards [CARD].
2
2
2
2
Slide the [PICTURE/MPEG4/VOICE] Selector Switch to
[PICTURE].
3
3
3
3
Start playback at the scene you want to record, and press
the [PHOTO SHOT] Button.
≥
The size of the images input externally or recorded from a tape to the
card becomes [640
k
480].
≥
Please refer to “Recording the Contents of Other Equipment”
(
l
49)
,
regarding the recording from other e
q
uipment.
≥
For other notes concerning this item, see page 49.
F 7
640
1,
1
TAPE
CARD
1
4,
3
PHOTO
SHOT
3
3
W.B./SHUTTER/IRIS/
MF/VOL/JOG
PUSH
1
2
ACCESS
CAMERA
CARD P. B
VCR
PICTURE
RESET
MPEG4 VOICE
CARD
MODE
2,
2
OFF ON
MODE
3
1
3
4
2
A
ACCESS
CARD EJECT
6
5
