Panasonic NV-DS88A, Руководство по эксплуатации

Страница: 41 / 56

41
Others
Indications
Various functions and the Movie Camera status are shown
on the screen.
r
: Remaining Battery Power
≥
When the battery power becomes low, the Indication
changes. When the battery is discharged completely, the
u
(
v
) Indication flashes.
s
: (When you are using the AC Adaptor, the
[
s
] Indication may appear, however,
this is not a malfunction.)
R0:45: Remaining Tape Time
≥
Remaining tape time is indicated in minutes. (When it
reaches less than 3 minutes, the indication starts flashing.)
CINEMA: Cinema Mode (
l
21)
D.ZOOM: Digital Zoom (
l
20)
WIPE: Wipe Mode (
l
25)
MIX: Mix Mode (
l
25)
STROBE: Strobe Mode (
l
25)
GAINUP: Gain-up Mode (
l
25)
TRACER: Trailing Effect Mode (
l
25)
MOSAIC: Mosaic Mode (
l
25)
MIRROR: Mirror Mode (
l
25)
NEGA: Negative Mode (
l
25)
SEPIA: Sepia Mode (
l
25)
B/W: Black & White Mode (
l
25)
SOLARI: Solarisation Mode (
l
25)
PB ZOOM: Playback Zoom (
l
29)
SP: Standard Mode (Recording Speed Mode)
(
l
17)
LP: Long Play Mode (Recording Speed Mode)
(
l
17)
INDEX: Index signal recording (
l
28)
S 1: Search Number (
l
28)
5
k
: Zoom Magnification Indication (
l
19)
AUTO: Automatic Mode (
l
18)
MNL: Manual Mode (
l
22, 24)
[
: Image Stabilizer (
l
20)
MIC, AV IN: Audio Dubbing Input Display (
l
30)
12 bit, 16 bit: Audio Recording Mode (
l
17)
AUTOPRINT: Automatic Printing (
l
32)
MF: Manual Focus (
l
24)
ª
: Back Light Mode (
l
21)
5
: Sports Mode (Programme AE) (
l
22)
7
: Portrait Mode (Programme AE) (
l
22)
4
: Low Light Mode (Programme AE) (
l
22)
Ω
: Spotlight Mode (Programme AE) (
l
22)
º
: Surf & Snow Mode (Programme AE) (
l
22)
REC: Recording (
l
18)
PAUSE: Recording Pause (
l
18)
!
: Playback (
l
26)/Forward Camera Search
(
l
18)
"
: Reverse Camera Search (
l
18)
;
: Still Playback (
l
27)
%
: Fast-forward/Cue Playback (
l
26)
&
: Rewind/Review Playback (
l
26)
~
,
}
: Slow Motion Playback (
l
27)
";
,
;!
: Still Advance Playback (
l
27)
*
,
)
: Index Search (
l
28)
CHK: Recording Check (
l
18)
A.DUB
!
: Audio Dubbing (
l
30)
A.DUB
;
: Audio Dubbing Pause (
l
30)
PHOTO: Photoshot Mode Recording (
l
19)
BLANK: Blank Search (
l
27)
R
!
: Repeat Playback (
l
44)
2
k%
: Variable Speed Search (
l
26)
1/500: When you adjust shutter speed manually,
this indication appears. (
l
24)
SLIDE
!
: Slide Show Playback (
l
36)
SLIDE
;
: Slide Show Playback Pause (
l
36)
M.SLIDE
!
: Manual Slide Show Playback (
l
37)
M.SLIDE
;
: Manual Slide Show Playback Pause (
l
37)
F2.4: When you adjust the F Number manually,
this indication appears. (
l
24)
AWB: Automatic White Balance Mode (
l
22)
1
: White Balance setting Mode (
l
22)
z
: Outdoor Mode (
l
22)
{
: Indoor Mode (recording under incandescent
lamp) (
l
22)
Z.MIC: Zoom Microphone (
l
19)
WIND CUT: Wind Noise Reduction (
l
21)
æ
: Progressive Photoshot Mode (
l
19)
VOLUME: Volume adjustment (
l
26)
15:30:45: Date/Time Indication (
l
41)
N (F, E): Card Photoshot Picture Quality (during Card
Photoshot recording) [F] means Fine, [N]
means Normal and [E] means Economy.
(
l
34)
ø
(Red): Card Photoshot Recording (
l
34)
ACCESS: While Card is being read (during Playback,
Formatting and Multi-Picture Function use).
(
l
34)
¬
: Card not inserted (
l
34)
ø
(cyan): Card Photoshot Recording preparation
completed (
l
34)
00: Remaining Number of Card Photoshot
pictures (
l
34)
: Lock Setting (
l
39)
¥
(White): DPOF Setting completed (set to 1 or more
picture) (
l
37)
¥
(Green): Slide Show Settings completed (
l
40)
¥
(Blue): DPOF Setting (set to 1 or more picture)/
Slide Show Settings both completed
(
l
37, 40)
: [640
k
480] Image size
≥
For images not recorded with this Movie Camera, the size
display is determined as follows according to the the
number of horizontal pixels.
: From 640 to 800 (The size is not displayed
at under 640 pixels.)
: From 800 to 1024
: From 1024 to 1280
: From 1280 to 1600
: Over 1600
ª
To Change the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY SETUP]
Sub-Menu, you can change the Counter Display Mode to
Tape Counter Indication [COUNTER] (0:00.00), Memory
Counter Indication [MEMORY] (M0:00.00), and Time Code
Indication [TIMECODE] (0h00m00s00f). (
l
13) By
repeatedly pressing the [COUNTER] Button on the Remote
Controller, you can change the Counter Display Mode.
ª
To Display Date/Time Indication
To display Date/Time Indication, set the appropriate Date/
Time in [DATE/TIME] on the [DISPLAY SETUP] Sub-Menu.
(
l
13)
You can also press the [DATE/TIME] Button of the Remote
Controller repeatedly to display or change the Date/Time
Indication.
640
640
SVGA
XGA
SXGA
UXGA
A.book 41 ページ ２００１年７月２８日 土曜日 午前９時２７分