Basic Operations
8
9
Title
Procedure
Remarks, etc.
³
Before disconnecting the AC Mains Lead, set the
[OFF/ON] Switch to [OFF].
³
If you use the Movie Camera for a long time, it
becomes warm. However, this is normal.
³
The AC Mains Lead does not fit entirely into the AC
Adaptor socket, but this has no effect on operation.
The 3 Types of Power Supply
1) AC Adaptor (supplied) to supply power from an AC
mains socket
2) Car Battery Charger (optional) to supply power from
the cigarette lighter socket in a vehicle
3) Battery (supplied) (p. 10)
1) Supplying Power from an AC Mains Socket
AC Adaptor
AC Mains Lead
DC Input Lead
2) Supplying Power from the Cigarette Lighter
Socket in a Car
The use of the Car Battery Charger (VW-KBD2E;
optional) makes it possible to supply power to the
Movie Camera in a car for recording and playback. It
also allows charging the Movie Camera’s Battery.
Start the engine and then plug the Car Battery
Charger into the Cigarette Lighter Socket.
Car Battery Charger
DC Input Lead
Connect the DC Input Lead.
Connect the other
end of the AC
Mains Lead to an
AC mains socket.
Connect the AC Mains
Lead to the AC Adaptor.
Connect the plug of the DC
Input Lead to the [DC IN]
Socket on the Movie
Camera.
Connect the other plug
of the DC Input Lead to
the [DC OUT] Socket
on the AC Adaptor.
³
After use, be sure to disconnect the Car Battery
Charger from the cigarette lighter socket.
³
If the Car Battery Charger is already connected to the
cigarette lighter socket when you start the engine, the
fuse in the Car Battery Charger’s plug may blow out.
³
Also read the operating instructions of the Car Battery
Charger.
