English
Eng-2
4. Usage
●
Control Panel
Power Pad
(On/Off)
Reheating/
Steam Pad
Sterilizing/
Drying Pad
Drying Pad
Warm-milk
Pad
Time-Increase
Pad
Time-Decrease
Pad
Display
Window
Sterilizing
Pad
●
Follow as below steps before first using:
(1) Measure 90 ml water with the measuring cup (maximum
200 ml) and pour it into the water storage tank of the base.
(2) Place the body on the base and cover it with the lid.
(3) Insert the power supply cord, turn on the power supply,
press the Power Pad “
” to activate the product.
(4) Press the Sterilizing Pad “
” to start the sterilization mode.
(5) The product starts to generate steam when the water
temperature reaches 100
℃
, and automatically shuts
down when the water is completely boiled away.
(6) After sterilizing, allow to cool for 3 minutes, and then
disconnect the power and unplug.
(7) Remove the lid and the body, pour out the remaining
water in the water storage tank of the base, and dry the
product for normal use next time.
Milk Warming Function
(1) Measure 90 ml water with the measuring cup (maximum
200 ml) and pour it into the water storage tank of the base.
(2) Place the body on the base, put the container (baby
bottle, cup or bowl) with milk and water on a stable
place in the body, and then cover it with the lid.
(3) Turn on the power supply, press the Power Pad “
”.
(4) Press the Warm-milk Pad “
” , and then press the Pads
“
” and “
” to select the desired time of 3-15 minutes.
*The default setting to milk warming is 6 minutes.
(5) If there is no further operation in 3 seconds, it will enter
working state after a “Beep” sound.
(6) The product heats the water in the water storage tank
quickly to turn it into steam for heating. The product will
beep 3 times and the indicator will flash after the program.
Referential Time Chart for Warming Milk*
Water volume
Milk volume
Time for 5
℃
cold milk
Time for 20
℃
milk at
room temperature
90 ml
60-120 ml
3 minutes
3 minutes
120-180 ml
5 minutes
3 minutes
180-270 ml
6 minutes
4 minutes
>270ml
7 minutes
5 minutes