21
English
Appendix
To lock operation on the control panel
You can lock the control panel so that the settings are not changed with unintended operation or operation by
children.
Setting Procedure
Press and hold
for at
least 3 seconds.
A beep sounds, “CL” appears in the notice indicator, and the
setting is completed.
(After a short time, “CL” disappears in the notice indicator.)
●
While lock function is activated and any key is pressed, ”CL” appears in the notice indicator.
●
To unlock, do the same operation as above.
To adjust the brightness of nanoe
™
X lamp
The brightness of nanoe™ X lamp can be adjusted. (P. 9)
(You can adjust only when the temperature setting indicator of PRIME FRESH is not flashing.)
Setting Procedure
Press
twice, then press
and hold
for at least
10 seconds.
A beep sounds.
Press
to select your desired brightness.
Approx. 10 seconds later, setting is completed.
Setting
1
2
3
Brightness
OFF
Dim
Bright
(The setting is “3” at the time of purchase.)
●
Above setting does not affect the effect of nanoe™ X.
●
To cancel, operate as above and set to “ 3 ” (Bright).