How to Clean the Refrigerator
Once every 3 months
Prime Fresh case
Removing
1
Fully open both doors of the Fridge
compartment.
2
Remove the 2 bottle shelves
5
(According to Parts Identification
in Page 19 ~ Page 22) before removing
the Prime Fresh case.
3
Pull the case forward until it reaches
the end and gently lift the front of the
case to remove it completely.
Attaching
1
Insert the Prime Fresh case into the
shelf.
2
Gently lift the case and push forward
until it reaches the end.
3
Install the bottle shelves
5
.
Once every 3 months
Prime Freeze
Removing
1
Pull out the Prime Freeze completely.
2
Lift the case, tilt it, and lift it out of the compartment diagonally.
Aluminum heat transfer plate
(Note that the aluminum plate
is easy to be scratched and
deformed)
Attaching
1
Pull out the Prime Freeze case, lift the back of the case and hook along the inner
grooves until it matches and touches the end point.
Remark
●
The aluminum heat transfer plate can be removed; however, remember not to hold it with
wet hands when the aluminum plate is cold, as there may be a risk of frostbite.
●
When removing or installing the case, be sure to grasp the tray handle with your
outstretched hand. Otherwise, the compartment door may accidentally hit your finger.
Please refer to the illustration above.
●
If cleaning by water, wipe the aluminum plate or allow it to dry before reinstalling into the
refrigerator.
● Do not wipe the lubricant off the contact surface of the guide rail.
If you have wiped out the lubricant, please contact with the Service Center.
47
