M
Is the refrigerator installed in the following
locations?
M
Has a heat radiating space been provided
around the refrigerator?
For safety, the grounding connection should be done
(For a refrigerator with plug (2-pin plug) without any grounding wire)
The grounding connection will allow prevention of danger resulted from electricity leakage.
The grounding connection can be performed in 2 ways as follows:
1. In the case that the grounding receptacle has been
prepared for the socket (plug socket), connect the
grounding wire to the screw used for grounding connection
at the bottom rear of the refrigerator (regarding the screw
used for grounding connection, please notice the
symbol) as shown in the illustration
1
.
2. In the case that the socket (plug socket) has not been
provided with any grounding receptacle, connect
the grounding wire to the screw at the bottom of the
refrigerator, (as regard to the screw used for grounding
connection, please notice the
symbol). And then
connect the other end to the grounding rod as shown in
the illustration
2
.
Prohibited spots for grounding connection
●
Water supply pipes and gas pipes (dangers from electric shock or explosion).
●
The grounding wires of telephone cords and lightning rods (dangers from lightning).
●
Locations subject to heat and
direct sunlight
(The cooling power will be
reduced and electricity wasted.)
●
Poorly ventilated locations with
high humidity
(Rust will be caused.)
●
Locations where the surface is
unstable and slanted
Æ
On carpet, mats, or vinyl
fl
oors,
place a plate underneath the refrigerator.
●
Locations not allowing the power plug to be
cleaned easily
(Dust accumulated may cause a
fi
re.)
Installation
5 cm or more
both left and right
10 cm or more
at the back of
the refrigerator
30 cm or more
above the
refrigerator
1
2
Grounding
receptacle
Grounding wire
Illustration for the
grounding connection
Before using for product.
4
NR-BY608X(INDIA)(EN).indd 4
NR-BY608X(INDIA)(EN).indd 4
11/24/2559 BE 4:49 PM
11/24/2559 BE 4:49 PM
