Trays
Door shelf
Vegetable case / Prime Fresh case
Removing
1
. Unhook the protrusion at the back by lifting it
upward and pulling the tray outward.
Attaching
2
. Push the tray until it reached the end lock.
L
Removing and re-installing for cleaning.
Before cleaning or conducting maintenance, be absolutely sure to disconnect the power plug from
the power outlet. Do not connect or disconnect the power plug with wet hands.
When the plug is disconnected, leave it for 10 minutes before plugging again. If not, the compressor
may not work.
Removing
1
. Pull the case unit forward until it reaches the end of the stopper.
2
. Lift the front of the case unit slightly and remove completely.
Attaching
1
. Insert the case unit into the supports.
2
. Slightly lift/ tilt the case unit up then push the case unit
forward till it reaches the end.
Notices
●
When removing the tray above the vegetable case,
please pull out the vegetable case
fi
rst and then
follow to removing the tray as above details.
●
In case of attaching the tray and it does not lock,
make sure that you did not attach it the wrong tray.
Notice
●
To keep vegetable and fruit and to maintain its vitamins,
please push until it locks property after use or clean the
vegetable case.
To Clean
Removing
1
. Lift it upward, alternating between the right and left side.
Attaching
2
. Place on both supports and then press in until it reaches the
end of supports.
Rail
Protrusion
13
NR-BY608X(INDIA)(EN).indd 13
NR-BY608X(INDIA)(EN).indd 13
11/24/2559 BE 4:49 PM
11/24/2559 BE 4:49 PM
