Installation
The distance requested for installation
●The top of the refrigerator and the ceiling at least
1
cm.
●The back of the refrigerator and the wall at least 5 cm.
●The sides of the refrigerator and the walls at least 3 cm.
Area around the installed unit
●
Do not
locate the refrigerator in a humid place as rust
may form and may cause electric leakage.
●
Do not
locate the refrigerator exposing to direct
sunlight as the heat and sunlight will increase the
temperature.
●
Do not
locate the refrigerator near heat source such
as cooking stove or oven.
●
Do not
block the openings around the refrigerator.
●The refrigerator must be located in the place where there is good
air circulation.
●In case of placing the refrigerator on an uneven surface, adjust
the adjustable bolt to make the refrigerator stand stably.
●In order to prevent the refrigerator from tipping due to
earthquakes, permanently fix it by using belts, etc.
Moving or shifting
●When moving or shifting the refrigerator, remove ice maker, freezer case, pan water
evap, etc. and check to be sure that there is no water in the refrigerator.
Power cord setting
●To bring power cord for use, pan water evap from left should be lifted up. Then bring the
power cord out and then insert pan water evap into the block by pressing at both the
sides.
LED lamp and grounding
●The refrigerator LED lamp, specially designed for this refrigerator, do not replace it by
yourself.
If you need replacement, please contact Panasonic Service Center.
●If there is no grounding wiring plug in refrigerator, it should be connected with grounding
connection to prevent electrical hazard from electric leakage.
1
6