8
Switching the
appliance on
Figure 3
As soon as the machine has been installed, you can plug it into the power socket.
When connected, the light behind the display panel will come on. After about
fi
ve seconds, the
temperatures of the refrigerator, fruit and vegetables / chill compartment and freezer will start
fl
ashing “8°C”, “8°C” and “-12°C” (
fi
gure 3).
●
These aren’t the actual temperatures. Because the appliance has just been turned on, the
refrigerator, fruit and vegetables / chill compartment and freezer have not yet cooled down.
●
When each compartment reaches the set temperature, the display stops
fl
ashing and shows
the actual temperature. Assuming the room temperature is about 32°C, no food is stored,
the door is closed and the appliance runs properly, this should take three to four hours.
Note:
In higher room temperatures, it may take longer for each compartment to cool down.
Selecting the
temperature
A
B
C
A
B
C
(A) Setting the main refrigerator temperature
Default temperature: 4°C
Setting range: 7°C to 1°C
To change the temperature:
1
Press once.
2
While it is
fl
ashing, press until the desired temperature is shown.
3
After
fi
ve seconds, the display reverts to the actual temperature. The unit will then adjust to the new
temperature.
(B) Setting the vegetable compartment temperature
Default temperature: 5°C
Setting range: 5°C to 0°C
To change the temperature:
1
Press once.
2
While it is
fl
ashing, press until the desired temperature is shown.
3
After
fi
ve seconds, the display reverts to the actual temperature. The unit will then adjust to the new
temperature.
(C) Setting the freezer temperature
Default temperature: -20°C
Setting range: -17°C to -25°C
To change the temperature:
1
Press once.
2
While it is
fl
ashing, press until the desired temperature is shown.
3
After
fi
ve seconds, the display reverts to the actual temperature. The unit will then adjust to the new
temperature.
Setting up
NR-B30FX&FG1.indb 8
NR-B30FX&FG1.indb 8
1/22/2009 12:56:10 PM
1/22/2009 12:56:10 PM
