background image

35

 CAUTION

Make sure the connected drain system is free from clogging or frozen water.

  Drain Hose Connection

Connect the Drain Hose into the Water Outlet with a minimum diameter of 40 mm, or let it 
run into the sink. Ensure that the Drain Hose is not bent or squashed. The top of the hose 
must be less than 1000 mm. 

A

B

Ø

40 mm

Counter

MAX 1000 mm

Water 
Outlet

  How to Drain Excess Water From Hoses

If the sink is 1000 higher from the fl oor, the excess water in hoses cannot be drained 
directly into the sink. It will be necessary to drain excess water from hoses into a bowl or 
suitable container that is held outside and lower than the sink.

  

Water Outlet

Connect the Drain Hose into the Water Outlet. The Drain Hose must be correctly fi tted to 
avoid water leaks. 

  

Extension Hose

If the Drain Hose extension is needed, make sure to use a similar Drain Hose. It must not 
longer than 4 metres; otherwise the cleaning effect of the Dishwasher could be reduced.

  Syphon Connection

The waste connection must be at a height less than 1000 mm (maximum) from the bottom 
of the dish. The water drain hose should be fi xed.

Installation Instructions

Содержание NP-6R2MUQNZ





































Отзывы: