Panasonic NN-SE284B, Руководство по обслуживанию

Страница: 18 / 31

7.3. Trouble related to Digital Programmer Circuit
SYMPTOM STEP CHECK RESULT CAUSE/CORRECTIONS
No display when oven is first plugged
in 1 Fuse pattern of D.P.C. Normal
→
Step2
Open Replace D.P.C. or Fuse Pattern
2 Low voltage transforment (L.V.T.)
secondary voltage Abnormal 0V L.V.T.
Normal
→
Step3
3 IC10 pin 4 voltage Abnormal Q10, ZD10, ZD11, ZD12
Normal=14V
→
Step4
4 IC1 pin 8 voltage or IC10 pin5 voltage Abnormal IC10
Normal=5V IC1, Display
No key input 1 Touch screen continuity Abnormal Touch screen
Normal IC1
No beep sound 1 IC1 pin 40 voltage Abnormal IC1
Normal=5V BZ210, IC220
No microwave oscillation at any
power 1 IC1 pin 47 voltages while operation at high
power Abnormal IC1
Normal=5V
→
Step2
2 Collector of Q220 voltage Abnormal Q220 and/or Q225, Q226, Q227
Normal 0.7V
→
Step3
3 Short circuit between collector of Q220
and emitter of Q225 Still not turn on RL1
RY1 turns on Q220 and/or Q225, Q226, Q227
Dark or unclear display 1 Replace display and check operation Normal Display
Abnormal IC1
Missing or lighting of unnecessary
segment 1 Replace IC1 and check operation Normal IC1
Abnormal Display
H95/H97/H98 appears in window and
oven stops operation.Program High
power for 1 minute and conduct
following test quickly, unless
H95/H97/H98 appears and oven
stops 1 Unplug CN702 (2 pin) connector and
measure voltage between terminals Abnormal=0V 1. Latch Switch
2. D.P.C. /Power Relay
Normal=120V
→
Step2
2 Unplug CN701 (3 pin) connector and
measure pin1 voltage of D. P. C. CN3 Abnormal=0V D.P.C.
Approx. AC 3V Magnetron
18
NN-SE284S / NN-SE284B / NN-SE284W