Panasonic NN-K575MF, Руководство по обслуживанию

Страница: 31 / 65

3.1. To set clock
OPERATION SCROLL DISPLAY
1. Plug the power supply cord
into wall outlet. BEFORE USE REFER TO
OPERATING INSTRUCTIONS
2. Press Clock pad.
3. Enter time of day (TOD) by
pressing appropriate
Number
pads.
4. Press Clock pad. TOD has
now been resistered into the
digital programmer circuit and will
count up by minutes.
3.2. Time cooking for two stage
OPERATION SCROLL DISPLAY
1. Place a water load in the oven.
2. Press Power Level pad
once to set High power.
(1st stage)
3. Set for 5 seconds by
pressing
Number pads.
5 Sec.= 5
4. Press Power Level pad 6
times to set Medium power.
(2nd stage)
5. Set for 1 minute by pressing
Number
pads.
1 Min.= 1 0 0
6. Press Start pad.
7. When 1st stage cooking time
has elapsed. Oven beeps twice
and automatically switches to 2nd
stage cooking.
8. When 2nd stage cooking time
has elapsed, oven beeps 5 times
and shuts off. Time of day or colon if set appears
in the display
3.3. Inverter turbo defrost
OPERATION SCROLL DISPLAY
1. Press
Inverter Turbo Defrost Pad.
2. Set the weight for 1 lb by
pressing
Number pads.
1 Ib= 1 0
3. Press Start pad.
4. Press Stop/Reset Pad
twice.Oven shuts off.
Time of day or colon if set appears
in the display
3.4. Auto Brown Cook (Example to
cook 6 oz Pizza)
OPERATION SCROLL DISPLAY
1. Place brown dish on glass
tray, and press
Preheat pad.
2. Press
Start
pad. Time in the display window will
count down.
3. When preheat time has
elapsed, a long beep will be
heard every 11 seconds for a
time frame of 3 minutes. Time of day or colon if set appears
in the display.
4. Open the door, and carefully
place food into the brown dish,
then close the door.
5. Press Pizza pad once for 6
oz serving.
(select 6, 9, 15oz)
6. Press Start pad.
When cooking time has elapsed,
Oven beeps 5 times and shuts
off. Time of day or colon if set appears
in the display.
3 OPERATION AND DIGITAL PROGRAMMER CIRCUIT
TEST PROCEDURE (NN-G463)
6
NN-G463 / NN-S443 / NN-S423 / NN-S413 / NN-413