IMPORTANT NOTICE
1.The following components have potentials above
2000V while the appliance is operated.
* Magnetron
* High voltage transformer
* High voltage diode
* High voltage capacitor
Pay special attention on these portions.
2.When the appliance is operated with the door
hinge or magnetron fixed incorrectly, the
microwave leakage can reach more than 5mW/cm
2
.
After repair or exchange, it is very important to
check if magnetron and the door hinge is correctly
fixed.
3.7. Sharp edges
CAUTION
Please use caution when unpacking, installing or
moving the unit, as some exposed edges may be
sharp to touch and cause injury if not handled with
care.
4. MEASUREMENTS AND ADJUSTMENTS
4.1. Adjustment of primary latch switch, secondary latch switch and
short switch.
1. When mounting Primary latch switch,Secondary latch switch and
short switch to door hook assembly, mount the Primary latch
swith, the Secondary latch switch and the short switch to the door
hook assembly as shown in table.
NOTE:
No specific adjustment during installation of Primary latch
switch,Secondary latch switch and short switch to the door hook
is necessary.
2. When mounting the door hook assembly to the oven assembly,
adjust the door hook assembly by moving it in the direction of
arrow in the illustration so that the oven door will not have any
play in it. Check for play in the door by pulling the door assembly.
Make sure that the latch keys move smoothly after adjustment is
8
Содержание NN-K153WF
