26
Timer Feature
This feature allows you to program the
oven as a kitchen timer. It can also be
used to program a standing time after
cooking is completed and/or to program a
delay start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
1.
• Press
Timer/Clock
once.
2.
• Set time, using Time
Select Dial to 5 min-
utes (up to 1 hour and
30 minutes).
3.
• Press
Start
.
Time will count down
without oven
operatings.
To Set Stand Time:
Example: To cook at P6 power for 3
minutes, with stand time of
5 minutes.
1.
Press 5 times
• Enter the desired
Power level
(see
page 16 for directions).
2.
• Set cooking time, using
Time Select Dial to
3 minutes.
3.
• Press
Timer/Clock
once.
4.
• Set stand time, using
Time Select Dial (up to
1 hour and 30 min-
utes).
5.
• Press
Start
.
Cooking will start.
After cooking, stand
time will count down
without oven
operating.
CAUTION:
If oven lamp is lit while using the timer
feature, the oven is incorrectly pro-
gramed. Stop oven immediately and re-
read instructions.
To Set Delay Start:
Example: To delay the start of cook-
ing for 5 minutes, and cook
at P6 power for 3 minutes.
1.
• Press
Timer/Clock
once.
2.
• Set delay time, using
Time Select Dial to 5
minutes (up to 1 hour
and 30 minutes).
3.
Press 5 times
• Enter the desired
Power level
(see
page 16 for directions).
4.
• Set cooking time using
Time Select Dial.
5.
• Press
Start
.
Delay time will
count down. Then
cooking will start.
NOTE:
1. When each stage
fi
nishes, a two-beep
signal sounds. At the end of the pro-
gram, the oven will beep
fi
ve times.
2. If the oven door is opened during Stand
Time, Kitchen Timer or Delay Time, the
time on the display will continue to count
down.
3. Stand time and Delay start cannot be
programmed before any automatic
Function. This is to prevent the starting
temperature of food from rising before
defrosting or cooking begins. A change
in starting temperature could cause
inaccurate results.
4. The maximum programmable time of
Standing Time, Kitchen Time or Delay
Time is up to 1 hour and 30 minutes
PA_F00039X90CP_Eng_PP01_0225.indd 26
PA_F00039X90CP_Eng_PP01_0225.indd 26
2013-2-27 15:51:06
2013-2-27 15:51:06