English
- Eng-38 -
Auto Cook Setting (Method 1)
This feature allows you to set some ordinary menus with different weights. It will cook automatically without setting power and
time. Select the category of food and then just enter the weight. Do not include the weight of any added water or the container
weight.
For menus No.1 - No.22, please operate as follows:
For menus No.23 - No.25, please operate as follows:
Without Preheating:
With Preheating:
After preheating, the oven
will beep 3 times,
put the food into the oven
immediately.
3. Set serving/weight by
using the dial.
1. Turning the dial clockwise
until the desired
Auto Cook
Menu Number
appears in
the display.
1. Turning the dial clockwise
until the desired
Auto
Cook Menu Number
appears in the display.
2. Press once to verify
your selection.
2. Press once to verify
your selection.
4. Press once to begin preheating.
"
Preheat
" will blink. After
preheating, the oven will beep and
the "
Preheat
" will stop blinking,
please put the food into the shelf
position within 2 minutes, then
close the oven door immediately.
4. Press
Start
pad.
The cooking time appears
in the display window and
begins to count down.
4. Press
Start
pad.
The cooking time appears
in the display window and
begins to count down.
Notes:
When you select an automatic program, auto cook menu number and symbols (as shown below) will appear in the display.
3. Set Serving/weight by
using the dial.
*
indicates the Wire Rack or Grill Tray should be used during cooking and placement of them.
*
indicates healthy menu.
F0003BU00HP_Eng_06_20160621.indd 38
2016/7/11 9:50:01