Panasonic NI -FS770, Руководство по эксплуатации

Страница: 9 / 18

16 17
Trouble-shooting
Problem
Causes Solution
No heating
The power plug has not been plugged in. Insert the power plug.
The product is abnormal.
Have your product repaired by the specified
service agent.
The power switch is “ O ”.
Turn on the iron with the power switch
“ I ”.
The powerful steam indicator light is flashing.
It indicates that the product is heating.
Please wait until the indicator lights up
in red.
No steam
The steam button is not pressed down. Press down the steam button .
There is no water in the water tank.
Use the cup to add water to the
“ MAX(
台灣
:
滿水
) ” position on the tank
window.
The temperature is set to “LOW”.
Please set the temperature to “MED” or
“HIGH”. (Refer to Pages 10-11 for details.)
The powerful steam indicator light is flashing.
It indicates that the product is heating.
Please wait until the indicator lights up
in red.
Problem
Causes Solution
English
English
The powerful 4x indicator
does not light up.
The steam button is not pressed and held for
10 seconds.
Press and hold the steam button for about
10 seconds.
The temperature is set to “MED” or “LOW”. Please set the temperature to “HIGH”.
There is no continuous
ejection of 4x powerful steam.
The 4x powerful steam is an instant ejection of strong steam instead of continuous steam.
The problem persists even
after you have followed
the above solutions.
Send your product to an authorized service centre for repair.
The automatic heating function or the auto
power-off function is not disabled (when the
indicator lights up in green).
Press the “ SET
(
台灣
:
設定
) ”
button to
disable the automatic heating function or
the auto power-off function.
Noise will be heard
when the product is
shaken
This sound comes from the pipe hitting the tank. It's normal.
There is a noise or
a sense of vibration
during operation This is the sound or vibration caused by water pumping in the tank. It's normal.
This is the noise of temperature controller during operation, which is normal.
If the temperature controller in the main body is activated, the steam volume may decrease for a
while. The steam volume will get back to normal once the temperature is stable. The steam will
be invisible occasionally, depending on the ambient temperature and indoor brightness.
Other types of water except distilled water or
pure water are added in the tank.
Pour the remaining water in the water tank
out. And use the cup to add distilled water
or pure water to the tank “ MAX
( 台灣 : 滿水)
”
mark.
The steam vents are blocked up with dirt
or scale.
Have your product repaired by the specified
service agent.
The steam is
insufficient
Trouble-shooting