18
CONDENSATE DISCHARGE
max 80 cm
510549
The moisture from the laundry is extracted in the condenser unit
and accumulated in the water container.
During the drying process, an indicator light will warn you when
the water container is full and which has to be emptied.
Interruption of the drying cycle due to the water container being
full can be avoided by running the condensate discharge tube,
found at the back of the appliance, directly into a drain.
If the condensate discharge tube is connected to a drain,
ensure the tube is firmly secured to prevent any water spillage
which could result in unexpected damage.
1
To remove the
tube from the
holder on the rear
of the appliance (on
the left hand side
under the cover),
use a flat-blade
screwdriver, and
carefully pull the
tube.
2
Connect the
tube to a
drain, located at a
maximum height
of 80 cm from the
ground.
NH-P8ER1_WGB_En.indd 18
2015/08/24 10:55:55
