– 16 –
2. Open the door and leave it open.
The oven lamp will turn on. “0” will appear in the display. While touching the Start
Pad, touch Prog Pad until the Digital Display Window will show “PROG” and “P”
(for more than 2 seconds).
3. Program Lock feature is now deactivated.
Note: In “Program Unlock”
a. Oven reverts to a two-touch operating mode (Number/Memory Pad + Start Pad).
b. Repeat and interrupt features are operational.
c. Memory Pads can be programmed.
d. Manual heating is operational.
e. Tone loudness control, length control and pitch control (beep tone at the end of
heating cycle/filter cleaning alarm) are operational.
L. To Read Program List
1. Open the door and leave it open.
2. While touching the Start Pad, touch Number Pad “1”.
All currently programmed information (the program set into each Number/
Memory Pad (A0 to C9), Beep Tone, Program Lock, Oven Lamp settings when
the door is open, Oven Lamp blink settings at the end of heating cycle and Oven
Lamp reduction settings during cooking information) will continuously appear.
Note: When the filter cleaning alarm counter is set, this appears after Program
Lock.
How to erase memory content
1. Open the door (keep it open) and press Prog Pad.
2. Select the memory number you want to erase, and press the Power Level
Selector Pad.
3. Press the Stop/Reset Pad, and “0” is displayed to indicate that memory is
erased.
*Memory content is automatically erased if overwritten.
เปิดประตูค้างไว้ กดปุ่ม Start ค้างไว้ แล้วตามด้วย Prog จนกว่าจะขึ้น " P "
