- 8 -
How to Operate
Before Operating
Make sure the oven is connected to a properly grounded electrical outlet.
When the door is closed, the Display Window is still blank. When the door is opened, the Display Window shows "0".
For the detail operation, see the page on each feature.
This oven is preset at the factory for the following:
1. Memory Pads are preset to High Power for the indicated heating times for single stage heating.
1 - 10 sec.
2 - 20 sec.
3 - 30 sec.
4 - 45 sec.
5 - 1 min.
6 - 1 min. 30 sec.
7 - 2 min.
8 - 2 min. 30 sec.
9 - 3 min.
0 - 3 min. 30 sec.
The
Double Quantity (x 2)
Pad is preset to automatically double the programmed time of each Memory Pad.
Example: press
= 2 mins.
+
2. Program Unlock.
3. Cycle counter set to "0" on all pads.
To set the power level:
Select power level before programming the cooking time.
1 time ..................HIGH
2 times ................MEDIUM HIGH
3 times ................MEDIUM
4 times ................LOW
5 times ................DEFROST
6 times ................HOLD
press
To set the cooking time:
You can set up to 99 minutes 99 seconds.
Example 1: To set 15 minutes 45 seconds
press
Example 2: To set 85 minutes 30 seconds
press
When you press the
START
Pad, the Display Window shows
1 hour 25 minutes instead of 85 minutes 30 seconds. When selected
cooking time is over an hour, the Display Window shows hours and minutes,
but the oven works for your setting time.
Display:
The Display Window will go blank (when the door is closed}:
• at more than 1 minute interruption.
• at more than 1 minute after completion of heating and
removing food.
The display will
fl
ash "0":
• continuously if food is not removed.
Oven Light:
Oven light will be turned on, when:
• you open the door.
• heating starts.
Oven light will be turned off, when:
• you close the door (no heating).
• heating
fi
nishes.
Display Window
IP5102_3BS80RP_Eng_10_150121.indd 8
IP5102_3BS80RP_Eng_10_150121.indd 8
2015-1-21 10:00:33
2015-1-21 10:00:33
