manualshive.com logo in svg

Panasonic NC-SU403P, Руководство по эксплуатации, Страница: 16 / 17

Поделиться
Скачать
Panasonic NC-SU403P Скачать руководство пользователя страница 16

16

Troubleshooting

Troubleshooting

Before calling a service supplier,

please check the following possible causes.

Possible cause

If...

How to fix

White or glittering

flakes floating in 

the hot water.

●

 The cause of this is “scale”. (

H

P.14) 

  It is not flakes of fluororesin.

  *  Water with a large content of minerals  

    in it such as mineral water or ionised  

    water, is more likely to cause a scale  

    or white layer in the hot water.

●

 When “scale” adhered, boiling sounds  

  become louder.

Boiling sounds 

become louder.

●

 Odors of chlorine remain depending on  

  the amount of chlorine in tap water.

Hot water has 

odors of chlorine.

● 

When the unit is new, resin used in the manufacturing may give off a 

mild odor. This will disappear with use. 

●

 If the unit is placed on surfaces such as a vinyl sheet, the odor may be 

carried over into the water.

Hot water has an 

unpleasant odor.

●

 Water has been added above maximum  

  water level.

Hot water comes 

out by itself.

●

 Lower the water level.

●

 The  mesh  filter  may  be  clogged  with

  “scale”. (

H

P.14)

Hot water does not 

flow out smoothly.

●

 Clean the filter with a brush.

●

 If the “scale” cannot be removed, 

  replace the filter. (

H

P.17)

●

 The automatic lock has been engaged.

Hot  water  does 

not dispense.

●

 Press the “Lock / Unlock” key.

●

 Clean the inner container 

  with a wet sponge. 

  (

H

P.14)

●

 If the “scale” still remains,

  clean with citric acid.  

  (

H

P.15)

● 

Press the “Long Boil / Reboil” key 

to reduce the chlorine. (

H

P.10)

Lamp blinks while buzzer 

sounds

(Power supply stops)

peep peep 

peep peep

Blinks 

alternatively

No-water boiling prevention 

function

●

 To prevent overheating, this 

is activated when it boils 

without water.

●

 

Is water filled higher than 

water supply level ?

●

 

Is the lid left opened when 

water is filled ?

●

 

It may light on:

●

 

when hot water is filled.

●

 

depending on method 

of filling water.

●

 

Is citric acid settled at the 

bottom of container while 

citric acid washing ?

●

 Fill the water higher than 

water supply level, close 

the lid and press 

.

●

 Press 

.

●

 Once disconnect the 

plug, mix with chopsticks 

and wash after citric acid 

is distributed. (

H

P.15)

Boiling without water will cause odor and change the color of fluorine resin. 

PZ05S667 NC-SU403 EN_2.indd   16

9/18/12   2:49:33 PM

Содержание NC-SU403P


















Отзывы:

Нет отзывов