11
Boiling
water
Pouring
out
How to Use
When the unit is not in use
Starts boiling
automatically.
Notifies when boiled.
Fall in temperature
(
)
Automatically switches
to 90℃ warm keeping
Unplug, and remove the lid. Pour out any remaining hot water slowly via
the
mark.
Lid release part
Operation panel
Requests
Connect the power plug after filling the water and closing the lid. (
1
→
2
)
peep peep
peep peep
Light on
Start of battery charging for cordless
dispensing (sign for battery charging)
Light off
Light on
(Displayed temperature is indicative)
When change the setting of warm keep temperature
(
H
P. 13)
When adjust the temperature suitable for tea
(
H
P. 13)
Press
Pour
pressing
Volume of water dispensed varies depending on
degree of pressing and dispensing time.
Light on
Automatically locked in 10 seconds after
dispensing is finished.
When dispensing while cord is
removed. (Cordless dispensing)
Guideline for dispensing volume
Dispensing period (Amount of time press continuously)
Less than 5 seconds From 5 to 12 seconds More than 12 seconds
Press slightly
Press strongly
*
Be careful for rebound of hot water when press strongly
When cordless dispensing
Only
*
1
Full water volume may not be indicated if frequently
dispensed.
●
Indication light turns off and cannot dispense hot
water after 8-10 hours even not dispensed.
Water temperature falls to about 90℃ in 1.0 hour after boiling at room temperature 20℃.
*
Temperature falls quicker if water volume is smaller.
●
Do not pour out water too swiftly.
If water splashes over lid release part or
operation panel, it may cause a malfunction.
●
Do not leave water in the container.
(It may cause the container to corrode or smell.)
Battery charge volume
Dispensing volume
Approx. 3L or more
w
1
1.5L or less
PZ05S667 NC-SU403 EN_2.indd 11
9/18/12 2:49:15 PM
