1
2
3
1
2
3
●
●
●
Remove the filter from the product (How
to remove the filter
→
Page 9).
Filter <about once every 2 weeks>
The product
Wash off the dust with water.
Let the filter air dry after washing.
Unplug the USB power cord
from the main unit.
Perform regular maintenance
and care.
Do not operate the product with the filter removed.
(Otherwise, the inhaled dust may enter the product,
thus resulting in malfunction.)
Wrap the product with a plastic
bag and store it in a
low-humidity place.
Wipe the outer surface with a
wrung out soft cloth. Wiping
with a hard cloth may damage
the surface.
The filter is fragile, so please do not press or wipe
it with too much force when cleaning. (Otherwise,
the inhaled dust may enter the product from the
damaged part, thus resulting in malfunction.)
When the dirt is difficult to remove, dampen a soft
sponge with a small amount of neutral kitchen
detergent to clean it. Then, rinse the detergent off
and let the filter air dry in a cool place.
Stubborn dirt
When idle for a long time
If a problem is encountered, please investigate it by going through the following items.
If the problem still persists, be sure to unplug the USB power cord from the main unit.
Please contact the dealer for repair.
●
Possible situation
The product
does not work.
Is the USB power cord connected properly and securely?
TROUBLESHOOTING
Please confirm the following
●
●
→
An odor is smelt.
Is there any dirt on the product or filter?
Please clean it. (Page10~11)
When nanoeTM X is generated, you may smell a slight ozone
odor, which is not harmful to your health. (Page 13)
●
●
→
运转停止
Operation stops.
Is the USB plug connected properly?
Please insert the USB plug into the USB socket properly. (Page 9)
A “jee” sound is
from the
emission outlet
There is a slight sound when nanoe
TM
X is generated. Depends
on the environment and operation mode, the sound may be a
bit loud or inaudible but it is not abnormal phenomena.
MAINTENANCE
8
Notice
Notice
