Panasonic nanoe EH-NA9J, Руководство по эксплуатации

Страница: 18 / 310

18
English
Troubleshooting
Problem Possible cause Action
Sparks can be seen inside the appliance when
using [HOT].
(These sparks are caused by the thermostat switch
which is the protective device, and are not dangerous.)
Dust is attached to the air inlet or air
outlet.
Hair or something is blocking the air
inlet.
Remove the attached dust.
(See page 17.)
Hot air repeatedly turns into cold air.
Do not block the air inlet.
The hot air is abnormally hot.
The power plug is abnormally hot.
The power plug is not fi rmly inserted
into the outlet.
Use an outlet in which the power
plug
fi ts snugly.
Sparks are generated inside the nanoe™ outlet.
The needle-shaped part located at
the back of the nanoe™ outlet is dirty. Perform maintenance on the
nanoe™ outlet. (See page 17.)
A noise (crackling) is heard inside the nanoe™ outlet.
There is a peculiar smell.
This is because nanoe™ and mineral ion produce a peculiar smell; there
is no in
fl uence to your body.
Water droplets fl y out from the nanoe™ outlet.
Water droplets occasionally fl y out from the nanoe™outlet when
generating nanoe™; this is not an abnormality.”
The [HOT] lamp is blinking quickly (twice per
second).
Device abnormality.
Please consult an authorized
service center for repair.
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorised by Panasonic for repair.
Speci fi cations
Product model EH-NA9J
Power source
220 V 50 - 60 Hz 230 V 50 - 60 Hz 240 V 50 - 60 Hz
Power consumption 1 500 W 1 650 W 1 800 W
Accessory Styling nozzle, Diffuser
Airborne Acoustical Noise without nozzle 83 (dB(A) re 1 pW)
This product is intended for household use only.