4
Operation Panel
ECONAVI lamp (P. 8)
Operation panel
of the NA-FS16X3
Power Off/On
Air Dry (P. 9)
Start/Pause
Program selection (P. 5)
J?QYZ
Change process
settings
Change the combination of wash,
rinse and spin processes, and the
time length or number of times for
individual processes. (P. 9)
Flashing (in progress)
Lighted
After starting operation, you
can change settings only during
wash process by pressing
“Start/Pause”.
Preset
[ "
hours). (
lights.)
e.g.) 8 hours later
Setting range: 2 - 24 hours
later, in one-hour increments.
(3 - 24 hours later for the Power
"\[
Not available for the following
programs:
Gentle Hand Wash, Fragrance,
Comforter, Tub Hygiene, Air Dry
NOTE
In case of a power failure
during operation, operation will
resume from the point where it
was stopped when the power is
recovered (Auto Restart).
The power turns off
automatically if you do not press
“Start/Pause” within
10 minutes after power-on.
Change water
amount
During the wash
process, press “Water
Level” to change the
water amount.
Some water amounts
cannot be selected
depending on the
program.
Only during the
wash process,
press “Water Level”
"
amount.
Water level/water amounts
Level
High
10-8
Mid
7-5
Low
4-2
Extra
Low
1
Model
Detergent*
Water
amount (L)
99 88 81 74 66 59 52 46 38
33
NA-
FS16X3
93 88 81 74 66 59 52 46 38
33
NA-
FS14X3
*
: 1 scoop of detergent
Each water level, except “Extra Low”, has three
water amount options that can be switched
while the level is lighted by pressing “Water Level”.
(Example: For NA-FS16X3, “High” has 99 L,
88 L and 81 L options.)
Water amount/
remaining time
After starting operation, indicates
the water amount according to
the amount of laundry.
After approx. 5 seconds, indicates
the approximate remaining time
(min).
^
Touch operation
Operation buttons are capacitive
(Except for the power Off/On
and Start/Pause buttons). Touch
the buttons directly with your
%
When a towel containing
water or detergent touches an
operation button, the appliance
may malfunction.
