Panasonic NA-FS16X3, Руководство по обслуживанию

Страница: 8 / 21

OPERATIONS PANEL / SAUDI ARABIA
Power Off/On
Air Dry
Start/Pause Program selection Child Lock lamp
Change water
level
During the wash
process, press “Water
Level” to change the
water level.
●
Some water levels
cannot be selected
depending on the
program.
●
Only during the wash
process, press “Water
Level” to check the
water level.
Water level/water amounts
Level
High
10-8 Mid
7-5
Low
4-2
Extra
Low
1
Detergent *
Water amount
(L)
99 88 81 74 66 59 52 46 38 33
* : 1 scoop of detergent
●
Each water level, except “Extra Low”, has
three water amount options that can be
switched while the level is lit by pressing
“Water Level”.
Water level/remaining time
After starting operation, indicates the
water level according to the amount
of laundry.
After approx. 5 seconds, indicates the
approximate remaining time (min).
ECONAVI lamp (P. 12)
NOTE
●
In case of a power failure during operation, operation will resume from the point where it was stopped when the
power is recovered (Auto Restart).
●
The power turns off automatically if you do not press “Start/Pause” within 10 minutes after power-on.
■
Touch operation
●
Operation buttons are capacitive (Except for the power Off/On and Start/Pause buttons). Touch the buttons
directly with your bare
fi ngers.
●
When a towel containing water or detergent touches an operation button, the appliance may malfunction.
Change process
settings
Change the combination
of wash, rinse and spin
processes, and the time
length or number of times
for individual processes.
Flashing (in progress)
Lighted
●
After starting operation,
you can change settings
only during wash
process by pressing
“Start/Pause”.
Preset
Set the time to fi nish washing
(in hours). ( lights.)
e.g.) 8 hours later
●
Setting range: 2 - 24
hours later, in one-hour
increments. (3 - 24 hours
later for the Power wash +
Soak program)
●
Not available for the
following programs:
Gentle Hand Wash,
Fragrance, Blanket, Tub
Hygiene, Air Dry
Temp Setting
For washing, cold water can be mixed
with hot water. Press the button to select
Hot/Warm/Cold.
Do not use water hotter than 60 ºC.
●
The estimated water temperature in
the tub during wash process (when
hot water is 50 ºC, and normal water
is 20 ºC):
Hot approx. 40 ºC
Warm approx. 30 ºC
●
Lamp indications
Lighted: Hot/Warm/Cold is set.
Flashing: Hot water is being supplied.
●
Not available for the following
programs: Gentle Hand Wash, Tub
Hygiene, Air Dry
NA-FS16X3
- 8 -