OPERATION PANEL / MIDDLE EAST
NA-F150A3
Power Off/On
Air Dry
Start/Pause
Program selection
Child Lock lamp
NOTE
●
In case of a power failure during
operation, operation will resume from
the point where it was stopped when the
power is recovered (Auto Restart).
●
The power turns off automatically if you
do not press “Start/Pause” within 10
minutes after power-on.
Change water
level
During the wash
process, press “Water
Level” to change the
water level.
●
Some water levels
cannot be selected
depending on the
program.
●
When the remaining
time is displayed,
press “Water Level”
to check the water
level.
Water level/water amounts
Level
High
10-8
Mid
7-5
Low
4-2
Extra
Low
1
Detergent *
Water amount
(L)
96 88 81 74 66 59 52 46 38
33
*
: 1 scoop of detergent
●
Each water level, except “Extra Low”, has
three water amount options that can be
switched while the level is lit by pressing
“Water Level”.
Water level/remaining
time
After starting operation, indicates
the water level according to the
amount of laundry.
After approx. 5 seconds, indicates
the approximate remaining time
(min).
Change process
settings
Change the combination
of wash, rinse and spin
processes, and the time
length or number of times for
individual processes.
Flashing (in progress)
Lighted
●
After starting operation,
you can change settings
only during wash process
by pressing “Start/Pause”.
Preset
Set the time to
fi
nish washing
(in hours). ( lights.)
e.g.) 8 hours later
●
Setting range: 2 - 24
hours later, in one-hour
increments. (3 - 24 hours
later for the Power wash +
Soak program)
●
Not available for the
following programs:
Gentle Hand Wash,
Fragrance, Blanket, Tub
Hygiene, Air Dry
- 7 -
