background image

4

2. FEATURES AND TECHNICAL INFORMATION

Model NA-F80B1 / NA-F80T1 / NA-F80H1 / NA-F90T1 / NA-F90H1 / NA-F1011T

 

Program

Time

Normal

   Approx. 47~56 min.

Mini

   Approx. 20 min.

Soak

   Approx. 107 min.

High Speedy

   Approx. 21~27 min.

Blanket 

   Approx. 55 min

Delicate 

   Approx. 29-32 min

Tub Hygiene

   Approx. 150 min

Soak 1 hour

   Approx. 107 min

Soak 8 hour

   Approx. 527 min

Product special features

•  Dial indicating detergent level after sensing wash level
•  Pre-set timer
•  Fabric softener dispenser
•  Detergent dispenser
•  Automatic power-off when fi nish
•  Dial indicating unusual sign (LED will blink)
•  Alarm ON-OFF
•  Overfl ow sensing device.
•  Ag Shower (NA-F80H1 / NA-F90H1 only)
  - This has the disinfection effect with Ag+.
  - This can be used for the course marked with 

.

Weight Sensor 

The weight is sensed by the moving force of
the Pulsator, which changes a capacitor pole
and releases a signal wave. The wave is changed
into a pulse number from which the clothes
weight is sensed. Prior to weight sensing for
Normal and Strong program, the machine runs
without water by spinning the Pulsator to left
and right for 4.2 seconds (ON 0.3 second-
OFF 0.4 second). The motor stops (OFF),
a water system counts the pulse number, then
calculates the accumulated pulse numbers for
drawing water into the tub over a defi ned level.
The dial will indicate High wash level.

 High             Medium             Low  

 Low                 Pulse Number                 High

Содержание NA-F80H































Отзывы: