4
Operation Panel
(Operation panel of
the NA-F65G7)
ECONAVI lamp (P. 5)
Auto Restart lamp
In case of a power
failure during
operation, operation
will resume from the
point where it was
stopped when the
power is recovered.
The lamp lights up
when the operation
resumes.
Power On/Off
The power turns off
automatically if you do not
press “Start”/“Pause” within
10 minutes after power-on.
Change water level
During the wash process,
press “Water Level” to
change the water level.
● Some water levels
cannot be selected
depending on the
program.
● Press “Water Level” to
check the water level.
Water level/
remaining time
Water level/
water amounts
Indicates the selected program (No.)
After starting operation, indicates
the water level according to the
amount of laundry.
Indicates the approximate
remaining time (min).
Water
Level
Water amounts
NA-F70H7
NA-
F65G7
F65H7
NA-
F62G7
F62H7
10
52 L
48 L
46 L
9
48 L
44 L
8
42 L
7
39 L
6
37 L
5
35 L
4
32 L
3
31 L
2
29 L
1
20 L
Select [1] - [10]
Child Lock lamp (P. 11)
Start/Pause
Reserve
Set the time to finish washing
(in hours).
e.g.) 8 hours later
● Setting range: 2 - 24 hours
later, in one-hour increments.
(3 - 24 hours later for the
Soak program)
● Not available for the
following programs:
Gentle Hand Wash, Delicate,
Air Dry, Tub Hygiene
Temp Setting
For washing, cold water can be mixed with
hot water. Press the button to select Hot/
Warm. (P. 8)
Do not use water hotter than 60
°C.
● The estimated water temperature in the
tub during wash process (when hot water
is 50 ºC, and cold water is 20 ºC):
Hot
approx. 40 ºC
Warm
approx. 30 ºC
● Lamp indications
Lighting: Hot/Warm is set.
Flashing: Hot water is being supplied.
Off: Cold is set.
● Not available for the following programs:
Gentle Hand Wash, Delicate, Air Dry,
Tub Hygiene, Sweat, Sauces,
Collar/Cuff, Oil, Curry
Change process settings
Change the combination of wash,
rinse and spin processes, and the
time length or number of times for
individual processes. (P. 11)
Flashing
(in progress)
Lighting
● After starting operation,
you can change settings
only during wash process
by pressing “Start/Pause”.
(The wash process setting
of the Stain Master program
cannot be changed.)
Select [11] - [15]
• Stain Master (P. 9)
• When flashing quickly (P. 16)
