Installation
15
Make sure to ask a service person for installation.
■ Do not install by yourself.
■ If the installation, test run and inspection of the washing machine are not carried out following this installation
method, Panasonic will not be liable for any accident or damage caused.
4. Connect the water tap adaptor and water supply hose.
■
The procedure for cold water and hot
water is the same.
1
Connect the water tap
adaptor to the water
faucet.
1
Turn part A to the left until approx.
4 mm of the thread becomes visible.
2
Loosen the 4
screws.
3
Connect to the faucet and tighten
the screws.
4
Turn part A to the right and tighten
securely. (To prevent water leakage)
2
Connect the water
supply hose to the water
tap adaptor.
Insert the hose into the adaptor while
pushing down the lever, and hook
the claw of the lever on the flange of
the adaptor.
3
Connect the water
supply hose to the water
supply valve screw.
1
Hold the elbow and tighten the nut.
2
Check that the elbow is not loose.
Water faucet
Water supply hose
Water tap adaptor
CAUTION
●
Do not make wrong
connection of HOT and
COLD water supply hoses.
● Tighten the nut firmly.
● Do not twist, squash, modify
or cut the hose.
Part A
Flange
Thread
Lever
Claw
Screw
5. Connect the power plug and grounding wire.
● Ask a service person to do the grounding work.
6. Check that the washing machine does not wobble.
■
If the washing machine wobbles
3
Turn to the right to
tighten.
1
Turn the adjustable leg knob to
the left to loosen.
2
Turn the adjustable
leg to eliminate
wobble.
To lower
To raise
7. Perform a trial operation.
● Check that there is no water leakage, abnormal sounds or error display.
Elbow
Water supply valve screw
Nut
Water supply hose
HOT COLD
