Panasonic NA-F50GD, Руководство по обслуживанию

Страница: 14 / 26

Number of
times the ”
Water level”
button is
pressed
Check
/
Mode
Check contents Lamp
illumination
condition
Operation condition
0 A
-
End signal
-
Time indication
-
Auto power off
-
When the end buzzer sounds three times,”88” will
simultaneously flash on and off in the remaining time
the power will automatically be switched off immediately
operation is finished.
If other numbers or characters than “88” appear in the
time display, operate service check B-mode.
1 B
-
Wash operation
-
Feed valve / (To rinse
case) operation
-
Even if there is no water in the tub, the washing operation
continue for six minutes.
-
Press “Wash” button to change water flow.
-
During keep pressing “Rinse” button to check conducting
condition of rinse case’s feed valve.
-
“H05” is displayed in case of P.C.Board fault.
2 C
-
Spin operation
-
Lid switch operation
-
The spinning operation will continue for five minutes.
-
It is possible to check conditions of lid switches.
-
Incase contact point of the lid switch are OFF position,
indication light up.
3 D
-
Drying
-
Fun
-
Heater
-
Drying process shall be operated 4 minutes.
-
Rotate the tub approx. 700 rpm, and operate the fun
4 E
-
Set water level 1 rank
higher than laundry
amount detector
-
Change water flow to
gentle
-
Press the wash button to change L0 to L1 and press
button to confirm.
-
Press the course button to change water flow to gentle.
5 M
-
Initial set for / V-belt
tension
-
Press Start/Hold button to set initial setting for V-belt
-
It shall be needed after adjust V-belt tension.
6 G
-
Indicated Abnormal
alarm of last 2 times
-
“E” shall be indicated initially, Press “Wash” button
last time to the time before last and return to E as initial
-
If there were some abnormal alarm in the past, ”U or
some number shall be indicated mutually.
If it had no abnormal alarm,”00” mark has displayed.
7 H
-
Indicated operation
times
-
“C” shall be indicated initially, Press “Wash” button
“Indication of digit of operation times.
Press once:Digit “Thousand-Hundred” for washing
Press twice:Digit “Ten-One” for washing
Press 3 times:Digit ”Thousand-Hundred” for drying
Press 4 times:Digit ”Ten-One” for drying
Press 5 times to return to “C” digit.
9.1.1. Error indication descriptions
If there is an operation error, or if there is a problem with washing machine, operation shall be
14