Operation Panel
9
NOTE
In case of a power
failure during operation,
operation will resume
from the point where it
was stopped when the
power is recovered
(Auto Restart).
The power turns off
automatically if you do
not press “Start/Pause”
within 10 minutes after
power-on.
Water level/water amounts
Level
High
10-8
Mid
7-5
Low
4-2
Extra Low
1
Model
Detergent*
NA-F150A5WSA
NA-F130A5
Water
amount (L)
96 88 81 73 66 58 52 46 38
33
*
: 1 scoop of detergent
For model NA-F150A5WSA, water level for “Soak Program”
in accordance with standard SASO 2885 (Full load: 96 L / Half load: 73 L)
Each water level, except “Extra Low”, has three water amount options that
can be switched while the level is lighted by pressing “Water Level”.
Temp Setting
For washing, cold water can be mixed with hot water.
Press the button to select Hot/Warm/Cold.
(P. 14)
Do not use water hotter than 60 ºC.
The estimated water temperature in the tub during
wash process (when hot water is 50 ºC, and normal
water is 20 ºC): Hot
approx. 40 ºC
Warm
approx. 30 ºC
Lamp indications
Lighted: Hot/Warm/Cold is set.
Flashing: Hot water is being supplied.
Not available for the following programs:
Gentle Hand Wash, Tub Hygiene, Super Dry 90
For model NA-F150A5WSA
temp setting for “Soak Program” in accordance with
standard SASO 2885 : - Cotton 60: Hot
- Cotton 40: Warm
e
Program selection
(P. 10)
Power Off/On
Stain Master
(P. 17)
AWW9901D2X03_EN.indd 9
AWW9901D2X03_EN.indd 9
7/2/20 2:18 PM
7/2/20 2:18 PM