Panasonic NA-128VA2, Руководство по обслуживанию

Страница: 10 / 49

4 MOVING AND INSTALLING
4-1 Carrying the washing machine
4-2
Removing the anchor bolts
A
B
You'll need the anchor bolts again if you move the washing machine, so make sure you
keep them safe. And if the washing machine passes to someone else, make sure you give
them the anchor bolts.
4-3 Moving the washing machine from one location to another
Make sure to fix the anchor bolts for transportation to the washing machine.
Before you move the washing machine
Shut the tap and run the washing machine to drain the water. Drain any remaining water from the pump hose.
Depressurise the water-supply hose and remove it.
Disconnect the power cable.
Attach the anchor bolts .
4-4 Attaching the anchor bolts
Unscrew and remove the four cover caps.
Pull the bolts out, so their tips are level with the tips of the
sleeves.
(Ask someone else to hold the upper surface of the drum and
pull it forward.)
Insert the transportation guards 1, 2, 3 and 4.
Tighten each bolt.
Tighten the bolt so that spring length becomes 26mm.
-10-
Two or more people must carry the washing machine.
Start by tilting the washing machine backwards. One person
should stand behind it, holding the rear of the top panel.
The other person should grip the bottom stands at the front.
Don't touch the door opening button while holding.
Make sure of the needed accessories for installation.
Entrust the installation of the product to our dealer or
service agent.
To remove the anchor bolts:
washing
NA-168VX2/168VG2/148VA2/128VA2/147VB2