GB12
GB13
English
Motor housing
Jug gasket
Blender jug base
Mains lead
Power switch
(Located on the back)
Blade
Parts Names and Handling Instructions
■
Wash all the detachable parts before using the appliance for the first time or when you have not used it
for a while. (P. GB22)
A safety interlock system was designed to prevent the motor from
turning on without the blender jug, or the blender jug is not properly
engaged or is tilted during use.
Do not defeat the safety pins in any way. Doing so will cause the
motor to turn on, possibly causing personal injury.
Safety Lock
Cap
Handle
Lid unit
Accessories
Tamper
Use it to circulate or mash
ingredients. (P. GB19)
Ice pack (Cool it in a freezer for over 4 hours)
Use this ice pack to keep your mixture
cool (approx.30 minutes*) while blending
and/or after blending by wrapping it
around the blender jug. It may block the view when using the tamper.
* Cold Insulation duration may vary by temperature of room and ingredients.
Jug base holder
(Use it to attach/remove the
blender jug base.)
Drip tray
Use this drip tray when
using the ice pack to
collect water drops.
Safety lock pin
Menu indicator
Manual mode
Auto menus
Pulse (for manual mode only)
Stop/Start
Operating Time
Shows operating time when using an
auto menu by using bars that
decrease until completion. Turn the
dial left or right to respectively adjust
for a shorter or longer operating time
before pressing the stop/start button.
Speed
Shows blending speed by using
bars when operating manual
mode. Turn the dial to the left or
right to respectively adjust for a
lower or higher speed before
pressing the stop/start button.
Control panel
Dial
Adjusts time and speed.
Juice
Smoothie
Puree
Soup
Grind
Frozen
Use this function for short
duration. It only operates
when “Pulse” is held down.
Control panel
Circuit breaker (Located on the bottom)
(P. GB25) (Reset)
Blender jug
Working capacity: 1800 mL
Lid gasket
Sticking position: Refer to the
directions on the “Menu label”.
Menu label
Mains plug
Cleaning brush
Lid
