－
E7
－
－
E6
－
English
Introduction
Product designation
Product Overview
This motor is brushless type. Carefully read through this manual so that you will properly
and safely operate it for a long term.
This motor is designed to be built into general-purpose industrial equipment. However, only
properly trained and responsible individuals should operate this product.
<Caution>
When exporting a product containing this motor, make sure that the product will meet the
legal requirements of the destination country.
After unpacking
• Make sure that the model is what you have ordered.
• Check whether the product has been damaged or not during transportation.
If any deficiency should be found,
contact the dealer store where you bought this product.
Checking the model of Motor, Amplifier and Gear head
This amplifier is designed for use in combination with a motor to be specified by us.
Check a name of series, rated output, voltage specifications you wish to use
You must not use any other combinations than those listed below:
Failure to observe this instruction could result in breakdowns.
• GV series (Velocity control type)
Shaft
type
Voltage
(V)
Motor size
(mm)
Out put
(W)
Motor Type
Applicable
Amplifier
Applicable
Gear head *
Reduction
ratio
Pinion shaft
Single phase
AC100 to 120
□
80
50
MBMU5AZAX
MBEG5A1BCV
MX8G
○
B
3 to 180
□
90
90
MBMU9A1AZ
MBEG9A1BCV
MZ9G
○
B
MY9G
○
B
3 to 200
130
MBMU1E1AZ
MBEG1E1BCV
Single phase/
3-phase
AC200 to 240
□
80
50
MBMU5AZAX
MBEG5A5BCV
MX8G
○
B
3 to 180
□
90
90
MBMU9A2AZ
MBEG9A5BCV
MZ9G
○
B
MY9G
○
B
3 to 200
130
MBMU1E2AZ
MBEG1E5BCV
Round shaft
Single phase
AC100 to 120
□
80
50
MBMU5AZAS
MBEG5A1BCV
－
－
□
90
90
MBMU9A1AS
MBEG9A1BCV
130
MBMU1E1AS
MBEG1E1BCV
Single phase/
3-phase
AC200 to 240
□
80
50
MBMU5AZAS
MBEG5A5BCV
□
90
90
MBMU9A2AS
MBEG9A5BCV
130
MBMU1E2AS
MBEG1E5BCV
* A figure representing reduction ration in
○
e.g.) Part number of MX type gear head with reduction ratio 10 is MX8G10B.
• Brushless amplifier having the suffix V in the model designation is the GV series.
• GP series (Position control type)
Shaft
type
Voltage
(V)
Motor size
(mm)
Out put
(W)
Motor Type
Applicable
Amplifier
Applicable
Gear head *
Reduction
ratio
Pinion shaft
Single phase
AC100 to 120
□
80
50
MBMU5AZAB
MBEG5A1BCP MB8G
○
BV
5 to 50
□
90
90
MBMU9A1AB
MBEG9A1BCP MB9G
○
BV
130
MBMU1E1AB
MBEG1E1BCP MB9G
○
BV
Single phase/
3-phase
AC200 to 240
□
80
50
MBMU5AZAB
MBEG5A5BCP MB8G
○
BV
□
90
90
MBMU9A2AB
MBEG9A5BCP MB9G
○
BV
130
MBMU1E2AB
MBEG1E5BCP MB9G
○
BV
* A figure representing reduction ration in
○
e.g.) Part number of MB type gear head with reduction ratio 10 is MB8G10BV.
• Brushless amplifier having the suffix P in the model designation is the GP series.
