Panasonic MGSDB2 Series, Инструкция по эксплуатации

Страница: 6 / 25

– 11 – – 10 –
Serial number (production No.)
The Ser. No. on the nameplate contains the following codes.
M G S D B 2
Input power supply
1. Single phase 100 – 120 VAC
2. Single phase 200 – 240 VAC
Output
Series
100 V
200 V
A : 3 – 40 W
B : 60 – 90 W
B : 6 – 90 W
6 5 1 – 4
Example
Ser.No. * 06 11 0001 *
Manufacturing year
Manufacturing month
Sequential number
This product was manufactured in November 2006
and assigned a sequential number 0001.
Description of model No.
Designation and rating on the nameplate
Model
name
Rated
input voltage
Input current
Rated speed
Rated output
Serial No.
(production No.)
SPEED CONTROLLER
Model No.
Input
Input Current
Rated Speed
Rated Output
Ser.No. 06110001G
Made in China
50/60Hz 1Ph 200–240V
1.0A
1400/1700min
–1
6–90W
C58401
MGSDB2
1. Introduction
Unpacking
· Verify that the model No. matches your order sheet.
· Damage in transit is not found.
Should you find any discrepancy in the product,
consult your local dealer.
General description of the speed controller
The MGSD type speed controller is designed to operate with a small
geared motor to adjust and vary its speed. The speed is adjusted
from the speed setting knob. The input voltage can be single-phase
100-120 VAC, or single-phase 200 – 240 VAC. The speed controller
is compatible with EC directive and UL standard.
Compatible with DIN terminal block which is convenient to install on
the distribution board, and small timer common option available from
Panasonic Corporation (pp. 32 – 37).
Read this manual thoroughly so that you will become gradually ac-
quainted with the excellent features of your speed controller for small
geared motor and understand how to fully utilize these functions. The
speed controller is designed to be integrated into a general control
board.
The product must be handled by experienced personnel familiar with
the product.