– 9 –
– 8 –
Don't turn off and on power so
frequently.
Failure to heed this
instruction will result in
fire, personal injury,
malfunction or damage.
Don't pull leadwires with an
excessive force.
Failure to heed this
instruction will cause
fire, electric shock or
personal injury.
Failure to heed this
instruction will cause
fire, electric shock or
personal injury.
Don't use the equipment in highly
intensive electric field.
Don't use the equipment under
direct sunshine.
Failure to heed
these instructions
will cause personal
injury or fire.
Don't use the equipment in an
environment where electrostatic
voltage potentials may be
produced.
Induced malfunction
will cause
malfunction or
personal injury.
Don't drop or cause topple over
of something during
transportation or installation.
Don't use a variable transformer
or transformer having capacity
insufficient to feed the load.
Failure to heed this
instruction will result
in personal injury or
malfunction.
Failure to heed this
instruction will cause
fire, electric shock or
malfunction.
Don't use the equipment outside
the limits described on the
nameplate and user's manual.
Failure to heed this
instruction will result in
electric shock, personal
injury, fire, malfunction
or damage.
Never attempt to perform
modification, dismantle or repair.
Perform installation by taking into
consideration the mass of the
body and rated output of the
product.
Exactly follow the installing
method and direction specified.
Adjust ambient environmental
condition of motor and speed
controller to match the motor
operating temperature and
humidity.
Connect the motor
electromagnetic brake control
relay in series with a ground-fault
interrupter, circuit breaker and
relay so that they turn off the
circuit upon emergency stop.
Test-run the securely fixed motor
without loading to verify normal
operation, and then connect it to
the mechanical system.
Level of input voltage to the
speed controller should
correspond to the motor rated
voltage.
Operation using a
wrong model or
wrong wiring
connection will result
in personal injury.
Use the speed controller in
combination with the specified
motor.
Failure to heed this
instruction will result
in fire.
Failure to heed these
instructions will result
in personal injury or
malfunction.
Operation from a
voltage outside the
rated voltage will
cause electric shock,
personal injury or fire.
Provide protection device against
idling of electro-magnetic brake
or gear head, or grease leakage
from gear head.
Lack of protection
will cause personal
injury, damage,
pollution or fire.
Lack of connection
will cause
malfunction.
Don't lock the motor shaft while
the motor is running.
Don't clog or put an object into
the radiating hole of the motor.
Locked motor will
cause fire, electric
shock, or malfunction.
Failure to heed this
instruction will result
in fire.
Don't place any obstacle object
around the motor and peripheral,
which blocks air passage.
Temperature rise will
cause burn injury or
fire.
Correctly run and arrange wiring.
Maintenance must be performed
by an experienced personnel.
Wrong wiring will
cause personal injury
or electric shock.
Always keep power disconnected
when the power is not necessary
for a long time.
Scraps must be treated as
industrial waste.
Improper operation
will cause personal
injury.
Safety Precautions
Please observe safety precautions fully.
