28
VARIOUS SETTING (MENU/Tools)
Set of date, time, log interval (Tools/Date Time)
A date, time and a Log interval configuration screen (Date Time) are chosen on the top screen (Select
Tools). Then, each parameter is set up on the date, time setup screen (Date Time
）
.
Each parameter setting range:
1. Date:
Present date is indicated. (Example : in case of December 1, 2010) (Refer to a table 10.)
2. Time:
Present time is indicated. (Example : in case of 12:00:00) (Refer to a table 10.)
3. Door Delay:
The variable range of the door alarm delay is 0 to15 minutes. (Factory setting is 2
minutes.) (Page 29 Refer to a table 11)
4.
Log Interval:
Settable between 2 minutes and 30 minutes. (Factory setting is 15 minutes.) With 15
minutes interval, recording for about 5 weeks is available.
5. Comp Delay:
Delay time for high temperature side/low temperature side compressor after power
failure. The settable range is between 3 minutes until 15 minutes. (Factory setting is 3 minutes.)
Table 10 Setting of date and time (When time is set up at 12:00:00 on December 1, 2010 )
Description of operation
Key operated
Indication after operation
1
-----
Top screen is displayed
2 Press the MENU button.
MENU
The menu window is indicated. And the
“set” is highlighted.
3
Press the shift key, highlight the
“Tools” menu window, and press the
ENTER key.
Select Tools window is indicated.
4
Select Date by pressing Shift keys..
The Date
is highlighted.
5
Figure input key is pressed in order
of 1,0,1,2,0 , 1.
The numerical value of the date is
changed to 10/12/01.
6 Select Time by pressing Shift keys.
Time is highlights.
7
Figure input key is pressed in order
of 1, 2, 0, 0, 0, 0.
The numerical value of the time (Time) is
changed at 12: 00:00.
8 Press the ENTER key.
ENTER
Door Delay is highlighted.
9 Press the MENU button.
MENU
The menu window is indicated. And the
“OK” is highlighted.
10 Press the ENTER key.
ENTER
Date time is memorized, and the top
screen is indicated.
1
2
3
4
5
1
0
1
2
0
1
1
2
0
0
0
0
ENTER
