Panasonic MCU-L424 Скачать руководство пользователя страница 41

Страница: 41 / 44

- 41 -

Sales and support information
Customer Communications Centre

• For customers within the U.K.: 0844 844 3899
• For customers within Ireland: 01289 8333
• For further support on your product, please visit our website:

www.panasonic.co.uk

Direct Sales at Panasonic U.K.

• Order accessory and consumable items for your product with ease and confidence

by phoning our Customer Communications Centre Monday - Friday 9:00am -
5:00pm, (Excluding public holidays).

• Or go on line through our Internet Accessory ordering application at

www.pas-europe.com

• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided directly by Panasonic

U.K.

• It couldn’t be simpler!
• Also available through our Internet is direct shopping for a wide range of finished

products. Take a browse on our website for further details.

• The guarantee conditions set by our representatives in the country of sale is applied.

• Using consumable parts which are not those of Panasonic will make the guarantee

invalid.

• Repairs should be done by Panasonic service persons or technicians. Otherwise the

guarantee will be invalid.

• For more information, refer to the warranty card which has been included with this

product.

GUARANTEE

Содержание MCU-L424













































Результаты поиска

Содержание MCU-L424

Отзывы:

Похожие инструкции для MCU-L424

Бренды по названию

Популярные бренды

Panasonic MCU-L424, Руководство по эксплуатации

Результаты поиска

Содержание MCU-L424

Отзывы:

Похожие инструкции для MCU-L424

Бренды по названию

Популярные бренды