Replacing Brushes
E-Clip
Sujetador
de E
Bride en E
Agitator Shaft
Eje del agitador
Arbre d’entraînement
Right End Cap
Tapa de extremo
derecho
Bouchon droit
Agitator Holder
Soporte del’agitador
Support de l’agitateur
Agitator Pulley
Polea para correa
Poulie de la courroie
Brush
Cepillo
Brosse
Push Off
Empuje hacia
fuera
Pousser
➢
When the bristles on the agitator are
so worn that they do not touch a card
held across the lower plate, the
brushes should be replaced.
➢
Remove lower plate and agitator.
➢
Remove the E-clip from agitator shaft
and end cap.
➢
Do not bend agitator shaft or lose E-
clip.
➢
Pull agitator shaft out of agitator
body.
➢
Pull, or pry out, agitator holder and
belt pulley.
➢
Push each brush out of agitator body
as shown.
➢
Install new brushes by reversing
procedure.
➢
Reinstall agitator holder and agitator
pulley completely.
➢
Reinstall the agitator shaft, end cap
and E-clip.
➢
See enlarged view for correct
assembly of parts (page 38).
➢
Position belt over belt pulley on the
agitator.
➢
Reinstall agitator and lower plate.
- 36 -
Card
Tarjeta
Carte
Содержание MC-V7319
Страница 51: ... 51 Notes Remarques Notas ...