Trouble Shooting
Please check the following first if you have any problems.
Problem
Possible cause
Solution
The appliance won’t
run.
Unplugged at socket outlet.
-
Mains lead fuse blown.
-
Thermal protector tripped.
-
Plug in firmly, turn on the
-
appliance.
Check fuse and replace it if
-
blown.(see page
4
)
Unplug the appliance, allow to
-
cool and thermal protector will
reset itself.(see page
3
)
Please clean up dust bin and
-
filter in the dust bin.
Poor job of dirt pick-
up.
Full or clogged dust bin.
-
Worn beater bar.
-
Clogged nozzle.
-
Clogged hose.
-
Hole in hose.
-
Hose not inserted fully.
-
Dirty filters.
-
Empty dust bin.(see page
-
8
)
Replace a new beater bar.
-
(see page
14
)
Check for clogs.(see page
-
11
)
Check for clogs.(see page
-
11
)
Take to your nearest
-
Panasonic Service Centre.
Check hose connection.
-
(see page
6
)
Clean the dust bin.
-
(see page
10
)
Replace a new HEPA exhaust
-
filter.(see page
14
)
Beater bar does not
turn.
Selection beater bar switch
-
at “OFF” position.
Overload protection reset
-
button on the nozzle tripped.
Move selection beater bar
-
switch to “ON” position.
Move selection ON/OFF switch
-
to “OFF”
position.
Unplug the appliance, remove
-
the dust from the nozzle
opening.(see page
9
)
Push the overload protection
-
reset button to reset.
(see page
5
)
If the problem cannot be solved, please contact your local customer service centre. The
contacts can be found in “GUARANTEE”, the separate paper which has been attatched with
the appliance.
12
UL710.indd 12
UL710.indd 12
2012/02/23 9:21:46
2012/02/23 9:21:46
