Panasonic mc-ul592, Руководство по эксплуатации

Страница: 17 / 20

PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
17
Review this chart to find do-it-yourself solutions for minor performance problems.
Any service needed, other than those described in these Operating Instructions, should be performed by an authorised
service representative.
• Design and specifications may be changed without prior notice.
• Weight and dimensions shown are approximate.
Vacuum Cleaner won’t
run.
1. Unplugged at socket outlet.
2. Mains plug fuse blown.
3. Thermal protector tripped.
1. Plug in firmly, turn on vacuum cleaner.
2. Check fuse and replace it if blown.
3. Unplug vacuum cleaner, allow to cool and thermal
protector will reset itself.
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.
Beater bar does not
turn.
1. Switch knob at “FLOOR” position.
2. Broken belt.
3. Overload Protection Reset Button on the Nozzle
tripped.
1. Move switch knob to the “CARPET” position.
2. Replace belt.
3. Push the Overload Protection Reset Button to reset.
Poor job of dirt
pick-up.
1. Full or clogged dust bin.
2. Worn beater bar.
3. Clogged nozzle.
4. Clogged hose.
5. Hole in hose.
6. Hose not inserted fully.
7. Dirty filters.
1. Empty dust bin.
2. Take to your nearest Panasonic Service Center.
3. Check for clogs.
4. Check for clogs.
5. Take to your nearest Panasonic Service Center.
6. Check hose connection.
7. Clean or change the Dust Compartment Filter Kit
(page 18).
8. Change the Exhaust Filter (page 18).
BEFORE REQUESTING SERVICE
SPECIFICATIONS
Specifications
Power source
Max. input
Nominal input
Dimensions (L x W x H)
Net weight
Dusting brush
Extension wand
Crevice
Floor nozzle 230 - 240 V ~ 50 Hz
1200 - 1300 W
391 mm x 372 mm x 1100 mm
✔
✔
MC-UL592
1400 W
8.6 k
g
1 pc
-
MC-UL594
1500 W
8.8 k
g
2 pcs
✔
REMINDER FOR CUSTOMER
The model and serial number of this product may be found on the name plate located at the rear of your vacuum cleaner.
You should note that the model and serial number in the spaces provided and retain this book as a permanent record of your purchase.
Model Number : _________________________________________________________
Serial Number : _________________________________________________________
Date Purchased : _________________________________________________________
Where Purchased : _________________________________________________________