12
• Check HEPA filter unit frequently and clean when dirty.
• Remove HEPA filter unit from dust bin by pulling both buckle as shown.
• Clean HEPA filter unit by gently tapping over a rubbish container.
Tap on Lid several sides to ensure best cleaning.
DO NOT
clean the HEPA filter unit by brush or clean it with water.
• Reinstall the HEPA filter unit as per reverse procedure.
MAINTAINING THE HEPA FILTER UNIT
• Remove HEPA filter unit from dust bin. Refer to maintaining the HEPA
filter unit (as above).
• Press the latch to open the dust bin plate.
• Grasp the pre-filter and turn it clockwise and pull the pre-filter out as shown.
Clean by gently tapping over a rubbish container.
• Install the pre-filter to the dust bin, aligning the pre-filter tabs to the dust
bin slots. Each Pre Filter Tabs is different shape and adjust it to match
Dust Bin Slot, then turn counter-clockwise to the lock position until you
hear a “click” sound as shown.
• After the dust bin is empty, firmly close the dust bin plate.
Make sure you hear a “click” sound to indicate that the dust bin plate is
fully latched.
• Reassemble the HEPA filter unit. Place dust bin unit back into vacuum
cleaner by inserting the bottom first and tilting back.
Refer to dust bin cleaning (pg.10).
TO CLEAN THE PRE-FILTER
Pull to release
Pull to release
Buckle
Dust Bin
HEPA Filter
Unit
Pre-Filter Tab
Dust Bin Slot
Pre-Filter
Lid
